Service Manual

18 Installation Guide
• Bxvbd.inf under the location C:\Broadcom\Program Files 64\
Broadcom\BDrv5706\VBD
• Bxnd.inf under the location C:\Broadcom\Program Files 64\
Broadcom\BDrv5706\Win2k8
• B57amd64.inf under the location C:\Broadcom\Program Files 64\
Broadcom\BDRVINST
• B57nd60a.inf and b57ports.inf under the location
C:\Broadcom\Program Files 64\ Broadcom\BDRVINST
7 If a storage driver (PERC S100 or S300) is required for the compute nodes,
extract the contents of the driver package to the default location. For
example:
C:\dell\drivers\.. .
Use the
Add button in the Manage Drivers window to add the required
storage drivers.
8 Click Close in the Manage Drivers window.
After the HPC configuration is complete, follow the steps in "Installing the
Compute Nodes" on page 18.
Installing the Compute Nodes
1 On the head node, open HPC Cluster Manager . Click Options 
Deployment Settings and select Respond to all PXE requests . This
enables the head node to initiate the installation of the compute nodes
through the network.
2 Ensure that the compute nodes are on the same network as the private
interface of the head node. Boot the compute nodes through PXE. If this is
not the default boot option for the compute nodes, assign PXE as the first
boot option in the system BIOS.
3 On the head node, open the Node Management pane. The nodes that
boot over PXE appear in the
Nodes list . Select the nodes on the list, right-
click and select
Assign Node Template...
4 In the Assign Node Template window, select Dell SLP ComputeNode
Template
and click OK .
After assigning the template, the compute nodes are installed
and configured.
book.book Page 18 Monday, September 20, 2010 1:36 PM