Service Manual
Installation Guide 13
• Select
Install all databases in the same folders
if you want to use the
same folder for all the HPC databases, specify the location (default
recommended) and then click
Next.
• Select
Install each database in separate folders
if you want each HPC
database in a different folder, and click
Next
. Specify the location for
each database in the next windows.
8
In the
Select Installation Location
window, select a destination for the
software installation (default recommended) and click
Next
.
9
Depending on head node internet connectivity, select
Use Microsoft
Update
, if required. Click
Next
.
10
Depending on participation in Customer Experience Involvement
Program, select
Yes
, if required and click
Next
.
11
In the
Install Required Components
window, click
Install
to install the
required components. The installation process may take a few minutes to
complete.
12
After the installation is completed, click
Close
.
If
the operating system is pre-installed on the head node
, follow the steps in
section "Configuring the HPC Pack on a Factory-Installed Head Node" on
page 13. If
the operating system is not pre-installed on the head node
, follow
the steps in section "Configuring the HPC Pack on a Non-Factory Installed
Head Node" on page 14.
Configuring the HPC Pack on a Factory-Installed Head Node
1
Go to the
HPC Cluster Manager
window and perform the tasks listed in
the
To-do list
after the installation script completes
.
2
Configure the Network task in the
To-do list
:
a
Click
Configure your network
.
b
In the
Network Topology Selection
window, select the network
topology of the cluster, for example
Compute nodes isolated on
a private network
, and click
Next
.
c
In the
Enterprise Network Adapter Selection
window, select the
NIC that acts as the public network adapter and click
Next
.
d
In the
Private Network Adapter Selection
window, select the network
connection that functions as the cluster interconnect and click
Next
.
book.book Page 13 Monday, September 20, 2010 1:36 PM