Users Guide
Table Of Contents
- Microsoft Windows Server 2012 R2 For Dell EMC PowerEdge Systems Installation Guide
- Introduction
- Como instalar e reinstalar o Microsoft Windows Server 2012 R2
- Using the Dell OpenManage 7.4
- Instalar o Windows Server 2012 R2 usando o Dell LifeCycle Controller
- Instalar o Windows Server 2012 R2 usando a mídia do sistema operacional
- Apêndice — Fazer o particionamento de uma unidade
- Escolher entre esquemas de partição
- Matriz de suporte a sistema operacional para os sistemas Dell EMC PowerEdge
- Obter ajuda
Como instalar e reinstalar o Microsoft Windows
Server
2012 R2
É possível usar um dos seguintes métodos para instalar o sistema operacional Microsoft Windows Server 2012 R2, caso não o tenha
instalado no servidor ou se quiser reinstalá-lo:
• Instalar o Windows Server 2012 R2 usando o Dell OpenManage 7.4
• Instalar o Windows Server 2012 R2 usando o Dell LifeCycle Controller
• Como instalar o sistema operacional usando a mídia do Windows Server 2012 R2
Tópicos:
• Using the Dell OpenManage 7.4
• Instalar o Windows Server 2012 R2 usando o Dell LifeCycle Controller
• Instalar o Windows Server 2012 R2 usando a mídia do sistema operacional
• Apêndice — Fazer o particionamento de uma unidade
• Escolher entre esquemas de partição
• Matriz de suporte a sistema operacional para os sistemas Dell EMC PowerEdge
Using the Dell OpenManage 7.4
CAUTION
: Backup all data from the system before installing or upgrading the operating system.
NOTE: Dell OpenManage 7.4 provides the latest drivers for Windows Server 2012 R2 and complete support for Windows Server
2012 R2 Standard, Foundation, Datacenter, and Essentials edition.
NOTE: This method of installation is supported in both BIOS and UEFI modes.
You must congure the system to boot from the optical drive. To install the operating system using the Dell EMC Systems Management
Tools and Documentation media:
1 Connect the keyboard, monitor, mouse, and any additional peripherals to your system.
2 Turn on the system and the attached peripherals.
3 Insert the Dell Systems Management Tools and Documentation media into the optical drive.
4 Press <F2> when you are prompted to run the setup utility.
The BIOS Settings screen is displayed.
NOTE
: You can press <F11> and directly boot from the DVD ROM and skip to step 7.
5 Using the arrow keys, scroll to the Boot setting > Boot Sequence eld and press <Enter>.
6 Congure the DVD ROM drive to be the rst boot option and press <Esc> to exit the BIOS Settings screen.
The system now prepares to boot from the optical drive.
The Dell EMC Systems Management Tools and Documentation media menu launches with several options.
7 Select Dell Systems Build and Update Utility.
The system now boots from the selected option and the Dell EMC Systems Build and Update Utility screen is displayed.
2
6 Como instalar e reinstalar o Microsoft Windows Server 2012 R2