Users Guide

Installation und Neuinstallation von Microsoft

Windows Server

2012 R2

Sie können eine der folgenden Methoden zur Installation des Microsoft Windows Server 2012 R2-Betriebssystems verwenden, wenn Sie es

noch nicht installiert haben oder eine Neuinstallation durchführen möchten:

• Installieren des Windows Server 2012 R2 mit dem Dell OpenManage 7.4

• Installation von Windows Server 2012 R2 mithilfe des Dell LifeCycle-Controllers

• Installation des Betriebssystems unter Verwendung Windows-Server-2012-R2-Medien

Themen:

• Using the Dell OpenManage 7.4

• Installation von Windows Server 2012 R2 mithilfe Dell-LifeCycle-Controllers

• Installation von Windows Server 2012 R2 durch Betriebssystem-Medium

• Anhang – Partitionieren eines Laufwerks

• Auswählen eines Partitionsschemas

• Betriebssystem-Support-Matrix für Dell EMC PowerEdge-Systeme

Using the Dell OpenManage 7.4

CAUTION

: Backup all data from the system before installing or upgrading the operating system.

NOTE: Dell OpenManage 7.4 provides the latest drivers for Windows Server 2012 R2 and complete support for Windows Server

2012 R2 Standard, Foundation, Datacenter, and Essentials edition.

NOTE: This method of installation is supported in both BIOS and UEFI modes.

You must congure the system to boot from the optical drive. To install the operating system using the Dell EMC Systems Management

Tools and Documentation media:

1 Connect the keyboard, monitor, mouse, and any additional peripherals to your system.

2 Turn on the system and the attached peripherals.

3 Insert the Dell Systems Management Tools and Documentation media into the optical drive.

4 Press <F2> when you are prompted to run the setup utility.

The BIOS Settings screen is displayed.

NOTE

: You can press <F11> and directly boot from the DVD ROM and skip to step 7.

5 Using the arrow keys, scroll to the Boot setting > Boot Sequence eld and press <Enter>.

6 Congure the DVD ROM drive to be the rst boot option and press <Esc> to exit the BIOS Settings screen.

The system now prepares to boot from the optical drive.

The Dell EMC Systems Management Tools and Documentation media menu launches with several options.

7 Select Dell Systems Build and Update Utility.

The system now boots from the selected option and the Dell EMC Systems Build and Update Utility screen is displayed.

6 Installation und Neuinstallation von Microsoft Windows Server 2012 R2