Important information

6 Contents
Windows Deployment Services (WDS) Server Does
Not List the Language String and Build Number of
the Operating System Image While Installing
Through a Remote Server
. . . . . . . . . . . . . . 24
Terminal Services Manager Does Not Reflect
Correct Connection Status . . . . . . . . . . . . . 24
I/O Requests are Timed Out If a Reset is Issued in
a Multi-Path or Multi-Host Configuration. . . . . . 24
Shutting Down a Cluster Node Inadvertently
Brings Down the Cluster
. . . . . . . . . . . . . . 25
Processor Speed Shown Incorrectly in the
Windows Server 2008 Device Manager . . . . . . 25
Windows Server 2008 Debug Using USB 2.0
Cable Does Not Work . . . . . . . . . . . . . . . . 25
Intelligent Platform Management Interface (IPMI)
Drivers are Listed Twice in the Device Manager if
You Load the Drivers Manually in an Older BIOS
and Then Upgrade the BIOS . . . . . . . . . . . . 25
Incorrect FailoverThreshold Value Displayed for
Groups on the Windows Command Line and the
Windows GUI . . . . . . . . . . . . . . . . . . . . 26
USB Key Might not get Populated Under
My Computer . . . . . . . . . . . . . . . . . . . . 26
Cannot Activate Server Core Online With a Proxy
That Requires Authentication. . . . . . . . . . . . 26
System Properties Window Comes up When
Windows Pre-Installation Environment (WinPE) is
Enabled for OSLOADER
. . . . . . . . . . . . . . . 27
System Does Not Boot to WinPE After Setting
BCDedit to Boot to WinPE
. . . . . . . . . . . . . 27
"Disk Full" Drives are not Listed During the Windows
Server 2008 Operating System Installation in a
PowerEdge System
. . . . . . . . . . . . . . . . . 28
BlueScreen During Startup or Shutdown When
Hyper-V is Enabled on Systems With Intel
Xeon 5600 Series Processors That Have Intel
SMX Enabled
. . . . . . . . . . . . . . . . . . . . 29
imp_info.book Page 6 Monday, March 21, 2011 1:52 PM