Owner's Manual
8 Deployment Guide
The Dell OpenManage Server Assistant automatically detects the CD and begins copying the operating
system files.
NOTE: This procedure may take several minutes to complete.
17
When prompted, remove the CD from the CD drive, and click
Finish
.
Your system automatically restarts, Windows Setup appears in text mode, and the installation continues.
NOTE: If Console Redirection is enabled in the System Setup program, you are prompted for an administrator
password in the text mode of Windows Setup. Enter an administrator password and press Enter to continue. The
Emergency Management System window appears. Click OK to continue.
Windows Setup automatically restarts your system, and the Windows Setup window appears. Windows
Setup completes the installation and restarts your system.
18
In the
Log On
window, type your administrator password, and click
OK
.
The system prompts you to insert the Microsoft Windows Server 2003 SP2 Disk 2 CD.
NOTE: If you want to install the optional R2 components, click OK and then see the "Installing the R2 Components"
on page 8 to complete the installation.
19
Click
Cancel
to proceed with the operating system installation without installing the optional R2
components.
The Windows Setup dialog box appears with directions on how to continue with the second CD install
at a later time.
20
Click
OK
.
The Windows Server Post-Setup Security Updates window appears.
NOTE: At this time, your Windows firewall is disabled. Dell recommends that you update your system with the
latest critical security updates and configure Automatic Updates before you click Finish.
21
Click
Finish
.
22
Click
Yes
to close the window.
The Manage Your Server window appears.
The operating system is now installed on your system. If you need additional information to complete
the rest of the installation, see the documentation that came with your software or go to the Microsoft
Support website at www.support.microsoft.com.
Installing the R2 Components
Perform the steps below to install the optional R2 components:
1
Insert the
Windows Server 2003 R2 Disk 2
CD into the CD drive, and then click
OK
.
The Welcome to the Windows Server 2003 R2 Setup Wizard window appears.
2
Click
Next
.
The End-User License Agreement window appears.