Reference Guide

Supported iDRAC events
Supported hardware Ports to metro node port-mapping events
The following table is generated through pulling out the cables from the system in real time. For more details about iDRAC
alerts, see https://qrl.dell.com/LCDError/Lookup.
Condition ID
(Platform
Alerts)
HW Label PortRole UDEV
(metro
node)
VS5
EndUser
(UI/CLI)
PortName
Physical
Port location
(Controller
ID)
Physical
Port location
(Port ID)
Message
FC102 FC1 front-end - IO-00 FC.Slot.1-1 1 The Fibre
Channel in
Slot 1 port 1
link is not
functioning
either
because the
FC cable is
not
connected or
the FC device
is not
functioning.
FC102 FC2 front-end - IO-01 FC.Slot.1-2 2 The Fibre
Channel in
Slot 1 port 2
link is not
functioning
either
because the
FC cable is
not
connected or
the FC device
is not
functioning.
FC102 FC3 back-end - IO-03 FC.Slot.2-2 2 The Fibre
Channel in
Slot 2 port 2
link is not
functioning
either
because the
FC cable is
not
connected or
the FC device
is not
functioning.
FC102 FC4 back-end - IO-02 FC.Slot.2-1 1 The Fibre
Channel in
Slot 2 port 1
link is not
functioning
either
because the
FC cable is
not
Events and Alerts 59