Reference Guide

alert. User can also send the alert notifications to a specified email or SMTP server. To configure SMTP server, see System
Configuration guide available at SolVe (https://solveonline.emc.com/solve/home/74).
Configure emailing notification
You can disable the notification emailing as a whole, or you can also disable the Email notifications for platform, iDRAC, or
monitor alerts individually.
Under Configure Alerts page, this configuration is provided where you can enable the mails only for the required alerts.
Procedure to disable email notifications
Follow these steps:
1. In the UI, click the Settings.
2. Select Notifications from the drop-down.
3. Click the CONFIGURE EMAIL NOTIFICATIONS as shown in the following figure:
Figure 6. Configure email notifications
4. To disable the email notifications for required component, switch the button of that component. You can disable the entire
emailing feature through switching the Email Notification Feature button.
Figure 7. Disable email notifications feature
Test email alert
Test email alert confirms the functionality of the email notification feature of the notifications service. Once the Test Email Alert
option is clicked, then an email alert goes to the respective configured email ID.
NOTE: If Email Notification feature is not enabled, then selection of Test Email Alert is disabled for a user.
1. From the UI, go to the Settings > Notifications or go to the Notifications > Platform Alerts > MORE > Configure
Alerts. The Configure alerts page is displayed.
2. Select MORE > Test Email Alert. An email alert is sent to the respective configured email ID.
16
Events and Alerts