Reference Guide
Table Of Contents
- Dell EMC Storage Systems Events and Alerts Guide for the metro node appliance
- Contents
- Events and Alerts
- UI overview
- Platform alerts
- Hardware alerts
- Alert states
- Scope of the events
- Sorting and filtering alerts
- Download .csv
- Default and hidden columns
- Live alerts
- Alerts roll-up
- Historical alerts
- Alerts on remote director
- Configure alerts
- Service Monitoring Alert
- Test alerts for platform, monitor, and SMS
- Heartbeat alerts
- Mail notification
- Configure emailing notification
- Test email alert
- Supported events
Steps:
1. In the UI, go to the Settings.
2. Select Notifications from drop-down. The Configure Alerts page is displayed.
3. Click the CONFIGURE NOTIFICATIONS button. A Configure Notification window is displayed.
4. To disable the Platform Alerts or Hardware Alerts or both, switch Platform Alerts button, or Hardware Alerts button,
or both buttons as shown in the following figure, and then click CLOSE to close the window.
Figure 3. Disabling alerts
If user enables it again, then it starts showing up future alerts that are associated with the hardware alerts and platform alerts in
the UI.
Disabling notifications
The entire notifications can be disabled, and user cannot see any future alerts in the UI.
Steps:
1. In the UI, go to the Settings.
2. Select Notifications from drop-down. The Configure Alerts page is displayed.
3. Click the CONFIGURE NOTIFICATIONS button. A Configure Notification window is displayed.
4. To disable the entire notifications, switch the Event Alert Feature button as shown in the following figure, and then click
CLOSE to close the window.
Figure 4. Disabling entire notifications
Events and Alerts
13