Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
Health status Definition
OK The virtual volume is functioning normally.
Unknown Metro node cannot determine the virtual volume's Health state, or the state
is invalid.
Non-recoverable error Metro node cannot determine the virtual volume's Health state.
Minor Failure One or more of the virtual volume's underlying devices is out-of-date, but will
rebuild.
Major Failure One or more of the virtual volume's underlying devices is out-of-date, but will
never rebuild.
Operational status Definition
OK The virtual volume is functioning normally.
Degraded The virtual volume may have one or more out-of-date devices that will
eventually rebuild.
Unknown Metro node cannot determine the virtual volume's Operational state, or the
state is invalid.
Stressed One or more of the virtual volume's underlying devices is out-of-date and
will never rebuild.
Error One or more of the virtual volume's underlying devices is hardware-dead.
Starting The virtual volume is not yet ready.
Service status Definition
Running The virtual volume is accepting I/O.
Inactive The virtual volume is part of an inactive or unhealthy storage view that the
hosts cannot see.
Unexported The virtual volume is not exported to a host.
suspended I/O is suspended to the virtual volume.
Cluster unreachable The virtual volume's cluster is unreachable.
Need resume Applies to virtual volumes on distributed devices only. The other cluster
detached the distributed device while it was unreachable. The distributed
device needs to be manually resumed for I/O to resume at this cluster.
Disconnected One or more legs on the underlying device have been disconnected.
Pool properties
Pool Name
The name of the pool available on the array.
Storage Array The name of the managed array on which the Pool was created.
Supported Pool
Types
The type of storage supported by the pool. Possible values are: Thin and/or Thick.
Policy The name of the policy associated with the storage pool.
Free Capacity The amount of free capacity available from the pool.
Used Capacity The amount of capacity already used from the pool.
Total Capacity The total capacity of the pool.
Provisioning storage 93