Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
Column Description
Storage Volume The name of the underlying storage volume.
Extent Properties Panel
This screen displays the properties of the extents in a separate panel at the extreme right side of the screen. Using the Extents
Properties panel, you can:
● View the details of the extent
● View the extent map
● Rename the extent
● View the details of the storage volume from where the extent has been created
● Turn on thin rebuild on the storage volume
● View the storage volume map
● Rename the storage volume
Tasks in this Screen
You can also perform the following tasks from this screen:
● Search for an extent — Click the icon corresponding to the element and type the full or the partial name in the field that
appears. Press Enter.
● Refresh screen data — Click the Refresh icon
.
● Create an extent - Click CREATE to open the Create Extents wizard.
● Create devices from extents — Click CREATE DEVICES to open the Create Devices using the Extents wizard.
● View the Map of the Extent — Select the extent, and then click VIEW MAP under the EXTENT tab in the Extent
Properties panel.
● Delete an extent — Select a claimed extent, and then click DELETE. The Use column indicates if an extent is in use.
● Rename an extent — Click the extent, and then click Rename under the EXTENT tab in the Extent Properties panel. Click
to save the changes.
● View the storage volume map — Select the extent, and then click VIEW MAP under the STORAGE VOLUME tab in the
Extent Properties panel.
● Rename a storage volume — Click the extent, and then click Rename under the STORAGE VOLUME tab in the Extent
Properties panel. Click to save the changes.
Opening the Extents view
From the GUI main menu, do one of the following:
1. In a metro node Local:
a. Select Provision Storage.
b. In the View by drop-down, select Extents.
2. In a metro node Metro:
a. Select Provision Storage.
b. In the Provision on drop-down, select the cluster of the extent.
c. In the View by drop-down, select Extents.
The Create Extents wizard
Use the Create Extents wizard to create extents from selected storage volumes. By default, metro node creates one extent
equal to the size of the selected storage volume. However, you can create an extent that is less than the capacity of the
storage volume, and use the unused capacity later. You can create a maximum of 128 extents per storage volume.
Provisioning storage
77