Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
Start Time The date and time the job started. Note that N/A may display in this field if you are connected to one
cluster and view the properties of a job that was started on another cluster.
Transfer Speed The maximum number of bytes of data transferred at a time from the source to the target. You can
change the transfer speed in the properties dialog box while the job is in the queue or in progress. Mobility
job transfer speed provides more information on selecting the transfer speed.
Status The status of the extent or device mobility job. Mobility job status provides more information.
Metro node port properties
Enabled Port Indicates whether or not the port is enabled. Use the checkbox to enable or disable the port.
Port Name The ID number for the metro node port.
Port Name Name of the port.
Director ID The ID of the director on which the port is located.
Port WWN The port's World Wide Name (WWN). The WWN is a unique network identifier for the port.
Port Node WWN The port's node World Wide Name (WWN). The WWN is a unique network identifier for the port's node.
Export Status Indicates whether or not this port is used to export storage. See metro node port status.
Storage array properties
Storage Array
Name
The name of the storage array manufacturer.
Storage Array
Family
The family of arrays that the storage array belongs to. Possible values:
● XTREMIO — The array belongs to the XtremIO family of arrays.
● CLARiiON — The array belongs to the VNX or Unity family of arrays.
● SYMMETRIX — The array belongs to the VMAX or Symmetrix family of arrays.
● Other — Metro node does not recognize the array or does not support creating thin volumes on the
array.
● - (dash) — The Storage Array Family property is not populated. There may be a connectivity
problem.
Controllers A list of controllers in the array. This list is empty if the array is not supported.
Ports A list of all port WWNs discovered for the array.
Logical Unit
Count
The number of LUNs exported from the array.
Connectivity
Status
Indicates if all LUNs exported from the array are visible to both directors. See Storage array connectivity
status.
Storage view properties
Storage view
Name
The name of the storage view. You can change the name in this field.
Operational
Status
Indicates how the storage view is functioning in the cluster. See Storage view status.
Active Indicates whether or not the storage view is active.
Help 169