Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
Test Alerts
The Test Alerts provides the information about the alerts are generating or not.
Prerequisites
The Event Alert Feature should be enabled.
Steps
1. From the UI, go to the Settings > Notifications or go to the Notifications > Platform Alerts > MORE > Configure
Alerts. The Configure alerts page is displayed.
2. Select More > Test Alerts . A window is displayed with the list of following alerts to test:
a. Platform alert
The two test alerts are generated from firmware:
● Cluster scope critical alarm
● Director scope error operational events
b. Monitor alert
c. SMS alert
3. Select the required alerts from the list and click YES. A Test Alert Result window is displayed which shows the result of
selected test alerts.
The state of these alerts is OPEN.
NOTE: Before triggering test alerts, close all existing test alerts.
Attribute Explanation
Alert type It is the name of alert type.
Details It displays the status of generated test alert.
Message It provides the description of the status for generated alerts.
4. Click the CLOSE button. It closes the window and changes the state of the alerts from OPEN to CLOSE.
Test Email
It is used to check that the email alerts are generating or not.
Prerequisites
● The Email Notification Feature should be enabled.
● SMTP details must be configured.
Steps
1. From the UI, go to the Settings > Notifications or go to the Notifications > Platform Alerts > MORE > Configure
Alerts. The Configure alerts page is displayed.
2. Select MORE > Test Email Alert. An email alert is sent to the respective configured email ID.
NOTE: If Email Notification Feature is not enabled, then selection of Test Email Alert is disabled for a user.
Notifications 143