Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
Event and Alert feature
Disabling the Event and Alert feature disables all the notifications and you do not receive any notifications that are generated
for alerts. To receive the notifications for generated alerts in future, enable this feature. To enable or disable this feature, go to
Settings > Notifications > Configure Alerts > Configure Notification, and enable or disable the Event and Alert feature
depending upon the requirement.
Component group level
The alerts can be enabled or disabled at the component group level. The component group can be either Platform alerts or
Hardware alerts. Enabling or disabling this feature enables or disables the alerts that are associated with all components of that
component group. The user can enable or disable both the component group or either one of them. To enable or disable this
feature, go to Settings > Notifications > Configure Alerts > Configure Notification, and enable or disable the Hardware
Alerts or Platform Alerts feature or both depending upon the requirement.
Component level
The email notification can be enabled or disabled at the component level. Enabling the email notification at component level
allows notifications for generated alerts that are associated with the respective components. Disabling the email notification
at component level do not allow notifications for generated alerts that are associated with the respective components. To
enable or disable the email notification at component level, go to Settings > Notifications > Configure Alerts > Configure
Notification, then enable or disable the email notification of the individual component depending upon the requirement.
NOTE:
Enabling or disabling of Platform alerts at component level affects respectively on related Condition IDs. The
following table shows the Component—>Condition ID mapping.
Component Condition ID Event Source
Certificate 0x8A4a61F6 CERTIFICATES
0x8A4a61F7 CERTIFICATES
0x8A4a91F8 CERTIFICATES
0x8A4a91F9 CERTIFICATES
Cluster 0x30013 CLUSTER
0x60001 CLUSTER
0x60005 CLUSTER
0x70001 CLUSTER
0x70002 CLUSTER
0x70003 CLUSTER
0x70004 CLUSTER
0x70005 CLUSTER
0x70006 CLUSTER
0x70007 CLUSTER
Consistency Group 0xd0002 CONSISTENCYGROUP
Device 0x3000b DEVICE
0x30015 DEVICE
Director 0x100001 DIRECTOR
0x100002 DIRECTOR
0x60002 DIRECTOR
0x60003 DIRECTOR
Notifications 139