Help
Table Of Contents
- Dell EMC Storage Systems Online Help for the metro node appliance
- Contents
- Figures
- Welcome
- Using the GUI
- Configuring GUI default settings
- Using storage hierarchy maps
- Viewing system status
- Monitoring the system
- Performance
- The Performance Monitoring dashboard
- Viewing a chart
- Modifying a dashboard layout
- Creating a custom dashboard
- Removing a chart
- Moving a chart
- Back-end Bandwidth Chart
- Back-end Throughput chart
- Back-end Errors chart
- Back-end Latency chart
- CPU utilization chart
- Heap Usage chart
- Front-end Queue Depth chart
- Front-end Bandwidth chart
- Front-end Latency chart
- Front-end Throughput chart
- Front-end Aborts chart
- Write Latency Delta chart
- WAN Port Performance chart
- WAN Latency chart
- Rebuild Status dashboard
- Virtual Volumes dashboard
- Front End Ports dashboard
- System Health
- Performance
- Provisioning storage
- Guide
- Provisioning from storage volumes
- Provision Job properties
- Distributed storage
- Storage arrays
- Storage volumes
- Devices
- About devices
- Using the Devices view
- The Create Devices wizard
- The Add Local/Remote Mirror wizards
- Viewing the status of IO to a device
- Creating a device
- Renaming a device
- Deleting a device
- Mirroring a device
- Device status
- Device component properties
- Device properties
- Distributed device properties
- Add capacity to virtual volumes
- Extent properties
- Extents
- Distributed devices
- About distributed devices
- The Distributed Devices view
- The Create Distributed Device from Claimed Storage Volumes wizard
- Distributed device rule sets
- Changing the rule set for a distributed device
- Creating a distributed device
- Deleting a distributed device
- Renaming a distributed device
- Distributed Device status
- Virtual volumes
- About virtual volumes
- The Virtual Volumes view
- The Distributed Virtual Volumes view
- Creating a virtual volume
- About virtual volume expansion
- Expanding a virtual volume using storage volumes
- Enabling or disabling remote access for a volume
- Manually assigning LUN numbers to volumes
- Deleting a volume
- Renaming a volume
- Tearing down a volume
- Virtual Volume status
- Pool properties
- Virtual volume properties
- Show ITLs dialog box
- Logical unit properties
- ALUA Support field values
- Visibility field values
- Extent or Device mobility job properties
- Metro node port properties
- Storage array properties
- Storage view properties
- Storage volume properties
- Create Virtual Volumes dialog box
- Consistency group
- About consistency groups
- Using the Consistency Groups view
- Distributed Consistency Groups view
- Create Consistency Group wizard
- Types of consistency groups
- Creating a consistency group
- Adding a volume to a consistency group
- Removing a volume from a consistency group
- Deleting a consistency group
- Consistency Group status
- Consistency group properties
- Step 1: Select or create a consistency group for the virtual volume
- Step 1: Create a consistency group
- Step 2: Select volume options
- Step 3: Select a storage pool
- Step 3: Select a pool for each mirror on the second cluster
- Step 3: Select a pool for each mirror in the cluster
- Step3: Create thin virtual volumes
- Select a storage view for the virtual volume(s) (optional)
- Step 5: Review your selections
- Step 6: View results
- Step 2: Select volume options
- Step 2: Select volume options
- Step 3: Select a storage volume to create the virtual volume
- Step 3: Select a source and target storage volume
- Step 3: Create thin volumes
- Step 3: Select a target storage volume on the remote cluster
- Step 3: Select target storage on the remote cluster
- Step 6: View results
- Show Logical Units
- Exporting storage
- Initiators and metro node ports
- Storage views
- About storage views
- Using the Storage Views screen
- The Create Storage View wizard
- Creating a storage view
- Deleting a storage view
- Renaming a storage view
- Adding or removing initiators from a storage view
- Adding virtual volumes to a storage view
- Removing virtual volumes from a storage view
- Adding or removing metro node ports from a storage view
- Storage view status
- Storage group properties
- Director properties
- Cluster properties
- Moving data
- Mobility
- Move Data Within Cluster
- Move Data Across Clusters
- Create Mobility Job wizards
- Mobility job transfer size
- Creating a mobility job
- Viewing job details
- Committing a job
- Canceling a job
- Pausing a job
- Resuming a job
- Removing the record of a job
- Changing a job transfer size
- Searching for a job
- Mobility job status
- Notifications
Column Description
with "UNREGISTERED-". You can rename the initiator during the
registration process.
Host Type The type of host associated with the initiator.
Node WWN A unique network identifier for the HBA's interface card. All ports on the
card share this node World Wide Name (WWN).
Port WWN A unique network identifier for the port.
Initiator Properties Panel
This screen displays the properties of the storage volumes in a separate panel at the extreme right side of the screen. Using the
Initiator Properties panel, you can:
● View the details of the initiator.
● Rename the initiator.
● View the details of the target ports.
Tasks in this Screen
You can also perform the following tasks from the Initiators view:
● Search for an extent–Click the icon corresponding to the element and type the name in the field that appears.
● Refresh screen data–Click the Refresh icon .
● Register a new initiator manually - Click REGISTER INITIATOR MANUALLY and type the following details in the pop-up
screen:
○ New initiator name–The name of the new initiator.
○ Host Type–The type of the host.
○ Port WWN–The WWN of the initiator port.
○ Node WWN–The WWN of the initiator node.
● Register an initiator–Select the initiator, and click MORE > Register.
● Unregister an initiator–Select a registered initiator and click MORE > Unregister.
● Rediscover an initiator–Select an initiator, and click MORE > Rediscover initiator.
● Rename an initiator–Click the initiator, and then click Rename under the INITIATOR tab in the Initiator Properties pane.
Click
to save the changes.
● View the status and properties of the initiator and the discovered target ports–Select the initiator to display its properties
and the target ports in the Initiator Properties panel. To view the properties of the target port, click the port name under
the TARGET PORTS tab.
Opening the Initiators view
From the GUI main menu, do one of the following:
1. In a metro node Local:
a. Select Provision Storage.
b. In the View by drop-down, select Initiators.
2. In a metro node Metro:
a. Select Provision Storage.
b. In the Provision on drop-down, select the cluster of the port.
c. In the View by drop-down, select Initiators.
114
Exporting storage