CLI Guide

connectivity validate-wan-com
Verifies the expected IP and FC WAN COM connectivity.
Contexts
All contexts.
Syntax
connectivity validate-wan-com
[-e|--show-expected]
[-p|--protocol] communication-protocol
Arguments
Optional arguments
[-e|--show-
expected]
Displays the expected connectivity map instead of comparing it to the actual connectivity. The map
is a list of every port involved in the WAN COM network and the ports to which it is expected to
have connectivity.
[-p|--protocol]
communication-protocol
Specifies the protocol used for WAN COM (FC or UDP). If not specified, the command
automatically selects either Fibre Channel or UDP based on the system’s Fibre Channel or Ethernet
WAN COM ports.
Description
This command assembles a list of expected WAN COM connectivity, compares it to the actual WAN COM connectivity and
reports any discrepancies (i.e. missing or extra connections).
This command verifies IP or Fibre Channel based WAN COM connectivity.
If no option is specified, displays a list of ports that are in error: either missing expected connectivity or have additional
unexpected connectivity to other ports.
The expected connectivity is determined by collecting all ports with role wan-com and requiring that each port in a port group at
a cluster have connectivity to every other port in the same port group at all other clusters.
When both Fibre Channel and IP ports with role wan-com are present, the smaller subset is discarded and the protocol of the
remaining ports is assumed as the correct protocol.
See also
● connectivity director
● connectivity show
● connectivity validate-be
Commands
95