CLI Guide

connectivity list initiators
Displays the initiators connected to directors.
Contexts
/: connectivity list initiators
/engines/*/directors/*/: list initiators
Syntax
connectivity list directors
[-h| --help]
[--verbose]
[-n| --directors]context path, context path...
[-f| ] filename
Arguments
Optional arguments
[-h | --help]
Displays the usage for this command
[--verbose]
Provides additional output during command execution. This may not have any effect for
some commands.
[-n | --directors] context
path , context path ...
Source director(s) for which connectivity should be reported.
[-f | --file] filename Writes the connectivity report to the named file instead of echoing it. If the file exists,
any previous contents will be lost. You can write the output to a file using an absolute
path, or using a path relative to the CLI directory.
[-d | --uuid]
Lists the connected directors by UUID instead of by name.
Description
Lists the initiators that are connected to a director. For each director specified, the list includes a table that reports each
initiator's port WWN (FC initiators only) and node WWN (FC) or IQN (iSCSI), and to which port on the director they are
connected.
See also
● connectivity list all
● connectivity list directors
● connectivity list storage-volumes
Commands
89