CLI Guide

See also
● configuration remote-clusters clear-addresses
● configuration show-meta-volume-candidates
● configuration system-setup
configuration remote-clusters add-addresses
Adds entries to the /clusters/*/connectivity/wan-com::remote-cluster-addresses list.
Context
All contexts.
Syntax
configuration remote-clusters add-addresses
[-c |--cluster] cluster context
[-d |--default]
[-r |--remote-cluster] cluster context
[-a |--addresses]addresses[, addresses...]
[-h |--help]
[--verbose]
Arguments
Optional arguments
Description
[-c |--cluster] cluster
context
* Specifies the cluster whose connectivity configuration is to be modified. Typically the
cluster above the current context.
[-d | --default]
Applies default configuration values. Default configuration pulls the cluster-address attribute
of the active subnets from all remote clusters. This option does not require --remote-
cluster or --addresses.
[-r | --remote-
cluster] cluster context
Specifies the remote-cluster configuration entry to modify. Cannot be the same context
specified in --cluster. This option is not required when --default is used. --
addresses is required if this option is used.
[-a | --addresses]
addresses [, addresses...]
Specifies one or more remote ip-address:port-number entries to add for the specified --
remote-cluster. This option is not required when --default is used. If this option is
used --remote-cluster is also required.
[-h | --help]
Displays the usage for this command.
[--verbose]
Provides more output during command execution. This may not have any effect for some
commands.
* - argument is positional.
Description
Adds one or more address:port configurations for the specified remote-cluster entry for this cluster.
78
Commands