CLI Guide

See also
● cluster unexpel
cluster forget
Tells metro node and Unisphere for metro node to forget the specified cluster.
Contexts
All contexts.
In /clusters context, command is forget.
Syntax
cluster forget
[-c|--cluster] context path
[-d|--disconnect]
[-f|--force]
Arguments
Required arguments
[-c|--clusters] context path * Cluster to forget.
Optional arguments
[-d|--disconnect]
Disconnect from all directors in the given cluster and remove the cluster from the context
tree after the operation is complete.
[-f|--force]
Force the operation to continue without confirmation.
* - argument is positional.
Description
Removes all references to the specified cluster from the context tree.
The prerequisites for forgetting a cluster are as follows:
● The target cluster can not be in contact with other connected clusters.
● The Unisphere for metro node cannot be connected to the target cluster.
● Detach all distributed devices with legs at the target cluster (there must be no distributed devices with legs on the target
cluster).
● No rule sets that affect the target cluster.
● No globally visible devices at the target cluster.
Use the following steps to forget a cluster:
1. If connected, use the cluster forget command on the target cluster to forget the other clusters.
2. Use the cluster forget command on all other clusters to forget the target cluster.
This command does not work if the clusters have lost communications with each other. If a cluster is down, destroyed, or
removed, use the cluster expel command to expel it.
62
Commands