CLI Guide

target-port -
topology p2p
See also
● set
show-use-hierarchy
Display the complete usage hierarchy for a storage element from the top-level element down to the storage-array.
Contexts
All contexts.
Syntax
show-use-hierarchy
[-t|--targets] path, path,...
Arguments
Required
arguments
[-t|--targets]
path, path,...
* Comma separated list of target storage elements.
You can specify meta, logging and virtual volumes, local and distributed devices, extents, storage-
volumes or logical-units on a single command line.
NOTE: A complete context path to the targets must be specified. For example:
show-use-hierarchy /clusters/cluster-1/storage-elements/storage-volumes/
volume
or:
show-use-hierarchy /clusters/cluster-1/storage-elements/storage-
volumes/*
* - argument is positional.
Description
This command drills from the specified target up to the top-level volume and down to the storage-array. The command will
detect sliced elements, drill up through all slices and indicate in the output that slices were detected. The original target is
highlighted in the output.
See also
● drill-down
● tree
292
Commands