CLI Guide

WAN Port Settings.................. OK
WAN Port Group Settings............ OK
WAN Subnet Settings................ OK
WAN Bridged and Routed Settings.... OK
WAN Ping Remote IPs................ OK
ping from director-1-1-A:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.328 ms
Remote Cluster IPs:
192.168.4.252 is reachable, Round-trip time:0.083 ms
192.168.5.252 is reachable, Round-trip time:0.081 ms
ping from director-1-1-B:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.431 ms
Remote Cluster IPs:
192.168.4.252 is reachable, Round-trip time:0.086 ms
192.168.5.252 is reachable, Round-trip time:0.083 ms
ping from director-1-2-A:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.297 ms
Remote Cluster IPs:
192.168.4.252 is reachable, Round-trip time:0.088 ms
192.168.5.252 is reachable, Round-trip time:0.103 ms
ping from director-1-2-B:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.311 ms
Remote Cluster IPs:
192.168.4.252 is reachable, Round-trip time:0.089 ms
192.168.5.252 is reachable, Round-trip time:0.075 ms
ping from director-2-1-A:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.371 ms
Remote Cluster IPs:
192.168.4.251 is reachable, Round-trip time:0.08 ms
192.168.5.251 is reachable, Round-trip time:0.091 ms
ping from director-2-1-B:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.443 ms
Remote Cluster IPs:
192.168.4.251 is reachable, Round-trip time:0.066 ms
192.168.5.251 is reachable, Round-trip time:0.083 ms
ping from director-2-2-A:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.347 ms
Remote Cluster IPs:
192.168.4.251 is reachable, Round-trip time:0.087 ms
192.168.5.251 is reachable, Round-trip time:0.087 ms
ping from director-2-2-B:
Remote Discovery IP:
224.100.100.100 is reachable, Round-trip time:0.397 ms
Remote Cluster IPs:
192.168.4.251 is reachable, Round-trip time:0.088 ms
192.168.5.251 is reachable, Round-trip time:0.087 ms
Output to /var/log/VPlex/cli/health_check_full_scan.log
Check the back end of a cluster
VPlexcli:/> health-check --back-end --verbose
Back End (BE):
Checking Unreachable Storage Volumes....... OK
Checking Degraded Storage Volumes.......... Error
Degraded storage volumes found
Error
Cluster cluster-1:
There are 8 storage volumes running in degraded mode.
Array: EMC-CLARiiON-APM00114102495
There are 8 storage volumes running in degraded mode.
First 4 storage volumes in degraded mode are:
VPD83T3:600601601dd028007a09da1b6427e111 is degraded ['degraded-timeout',
'degraded-read-write-latencies']
Commands
213