CLI Guide

Table 10. getsysinfo field descriptions (continued)
Field Description
System does NOT have comtcp enabled Communication protocol used on Ethernet ports for
connections to other clusters prior to Release 4.0. Ignore this
line.
Example
Display information and send the output to a file:
VPlexcli:/> getsysinfo --output /var/log/VPlex/cli/TestGetSysInfo
Running from localhost:/var/log/VPlex/cli
Local time 2010/08/04 14:22:43
Flag includeDebug = 0
Flag isLinux = 0
Treating this tower like version D4
clustercount = 2
26 ports - unknown system type
System does NOT have comtcp enabled
## ===== NCB: Cluster_1_Dir1A ====================
## ===== NCB: Cluster_1_Dir1B ====================
.
.
.
Raw output saved to /var/log/VPlex/cli/TestGetSysInfo.2010-08-04-14.25.raw
See also
● cluster summary
● director firmware show-banks
● manifest version
● version
health-check
Displays a report indicating overall hardware/software health.
Contexts
All contexts.
Syntax
health-check
[-m|--highlevel]
[-f|--full]
--configuration
--back-end
--front-end
--limits
--cache
--consistency-group
Commands
209