User`s guide

80
|
Web Interface Operation
Configuring SNMP Trap Receivers
To set SNMP trap receivers:
1 From the Network menu, click SNMP Configuration. The SNMP Configuration page displays.
2 Enter configuration values in the TRAP Receivers Table (see Table 26).
3 Click Save.
4 This procedure is completed.
Table 26 describes the attributes in the TRAP Receivers Table.
Table 26. TRAP Receivers Table
Attribute
Description
Index Index number of the entry in the table.
NMS IP Address NMS station address to which the trap should be sent. The NMS address is entered in
dotted format. IP address can be IPv4, IPv6, or DNS host name.
Community Community string of the trap rPDU to be sent. Limited to 15 characters.
Trap Type Disables traps or receives traps based on Dell DPI MIB. Selections are Disabled or MIB
Trap.
Severity Severity level of the trap to be received. Selections are:
S All Traps – All traps are received.
S Minor – Minor severity traps are received.
S Major – Major severity traps are received.
S Critical – Significant traps, such as the outlet voltage over threshold, are received.
S None – No traps are received.
Description User-defined description string for reference.