Users Guide

Specifying override parameters for unit monitors
To specify override parameters for unit monitors:
1. In the OpsMgr console, click Authoring.
2. In the Authoring pane, select Management Pack Objects > Monitors.
NOTE: You may need to change scope to locate the unit monitors.
3. Right-click the component unit monitor you want to override and select Overrides > Override the Monitor.
4. Check the appropriate monitor parameter that you want to override and set its Override Value.
5. Save the override settings in a new management pack.
6. Click Apply.
Extracting Dell MD Storage Array IP addresses from
Dell PowerVault Modular Disk Storage Manager
The Dell_MDStorageArray_ExtractMDListFromMDSM.vbs is a VB script that is packaged in the Dell MD Storage Array
Management Pack Suite. This script helps in extracting and saving the IP addresses of Dell PowerVault MD Storage Arrays
managed by the Dell PowerVault Modular Disk Storage Manager (MDSM) so that they can be managed in the OpsMgr. Run
this script as an administrator from a command prompt on a system where MDSM is installed. The IP addresses are saved
in the format required by the Dell MD Storage Array Management Pack Suite. For the Dell PowerVault MD Storage Arrays
to be discovered and monitored on the SCOM Management Server (OpsMgr machine), copy the saved file containing the IP
addresses to the OpsMgr machine and add the contents of the file to the dell_MDStorageArray_ip.cfg file present in
the OpsMgr machine.
NOTE:
Run the script as an administrator because the script invokes smclient.exe (installed with MDSM) to retrieve
the list of IP addresses, and smclient.exe requires elevation (run as Administrator) when run from the installed folder.
14 Using Dell MD Storage Array Management Pack Suite