Setup Guide
2
Installing, Uninstalling, And Upgrading The Dell
MD Storage Array Management Pack Suite
Version 5.0
Installation Notes
• Installing Dell PowerVault MD Storage Array Management Pack Suite, importing management packs, and
discovering Dell PowerVault MD storage arrays are separate procedures.
• Dell PowerVault MD Storage Management Pack Suite does not delete any debug log files.
• Dell PowerVault MD Storage Arrays can only be discovered using the Dell Discover Utility.
• Dell PowerVault MD Storage Array Management Pack Suite must be installed on the management servers in a
management group that are monitoring Dell PowerVault MD Storage Arrays.
• Dell PowerVault MD Storage Array monitoring configuration recommendation — If the IP listing file is replicated
across the management servers, many instances of Dell PowerVault MD Storage Arrays may be populated in the
views. Since, every additional instance has a load on the device, it is recommended not to replicate the IP listing file.
• The Dell ABB toolset must be installed on the management servers that monitor Dell PowerVault MD Storage Arrays.
If the Dell ABB toolset is not installed in the management server, an alert is generated. The alert is cleared when the
Dell MD Storage Array Management Pack Suite is installed on the management server. To view the alerts, see
Troubleshooting.
Installing The Dell MD Storage Array Management Pack Suite
Version 5.0
To install the Dell MD Storage Array Management Pack Suite Version 5.0, perform the following steps:
1. Download the Dell_MD_StorageArray_Management_Pack_Suite_v5.0_A00.exe file from dell.com/support.
2. Run the .exe file to extract the contents of the self extractable zip file.
3. Launch the Dell_MD_Storage_Management_Pack_Suite_x86_x64 file from the extracted location.
The welcome screen for Dell MD Storage Array Management Pack Suite is displayed.
4. Click Next.
The license agreement screen is displayed.
5. To continue the installation, accept the license terms after reading them, and click Next.
6. Click Change (if required) to change the default installation folder and click Next.
The Ready to Install the Program screen is displayed.
7. Click Install.
The Installing Dell MD Storage Array Management Pack Suite progress screen is displayed.
8. Click Finish on the InstallShield Wizard Completed screen.
6