Owner's Manual

Component Unit Monitor Name Description Time Interval
Enclosures Group:
Represents the
consolidated health of the
enclosures.
Dell MD Array Fans Group Dell MD Storage Array
Availability Rollup
Dependency Monitor for
MD Storage Array Fans:
Represents the
consolidated health of the
fans.
None
Dell MD Array Network
Interface Group
Unmonitored None. None
Dell MD Array Physical Disk
Group
Dell MD Storage Array
Availability Rollup
Dependency Monitor for
MD Storage Array Physical
Disks: Represents the
consolidated health of the
physical disk components
under the enclosures.
None
Dell MD Array Power
Supplies Group
Dell MD Storage Array
Availability Rollup
Dependency Monitor for
MD Storage Array Power
Supplies: Represents the
consolidated health of the
power supplies.
None
Dell MD Array RAID
Controller Modules Group
Dell MD Storage Array
Availability Rollup
None. None
Dell MD Array Virtual Disks
Group
Dell MD Storage Array
Availability Rollup
Dependency Monitor for
MD Storage Array Virtual
Disks: Represents the
consolidated health of the
virtual disks on the storage
array.
None
Customizing Unit Monitors
You can customize the following parameters of the Dell MD Storage Arrays Management Pack unit monitors by using
the following overrides:
• Enabled — Allows you to enable or disable monitors. You can set the Override Setting to be True or False. The
default setting is True.
• Interval in Seconds — The frequency (in seconds) with which the management pack polls the Dell PowerVault
MD Storage Array device to check the health of a component. The default setting for monitors could range
between 3600 - 4300 seconds.
Specifying Override Parameters For Unit Monitors
To specify override parameters for unit monitors:
17