User's Manual

The overview provides information on key host server attributes, including individual component health,
identification, hypervisor, and firmware information.
– Hardware Component Health is a graphical representation of the status of all major host server
components: system chassis, power supply, temperature, fans, voltage, processors, batteries, intrusion,
hardware log, power management, and memory. The available status states are:
* Healthy (green check mark) - component operating normally
* Warning (yellow triangle with exclamation point) - component has a non-critical error
* Critical (red X) - component has a critical failure
* Unknown (question mark) - status is unknown for the component
A global health status is displayed in the upper-right header bar.
– Server Information provides identification, hypervisor, and firmware information, such as:
* Host name, power state, iDRAC IP address, console IP address, connection profile in use, model,
service tag and asset tag numbers, number of days left on the warranty, and when the last
inventory scan was performed
* Hypervisor, BIOS firmware, and iDRAC firmware versions
– Recent System Log Entries provide the 10 most recent system event log entries. To launch the System
Event Log window that displays additional log details, click Details.
4. Under Host Information, click Hardware Inventory to display a list and further details on all components installed in
host system, including:
– Field-replaceable units (FRUs) - DIMMS, system planar, power supplies, backplanes, controller cards, and
so on.
– Memory - Number of slots available and in use, maximum capacity and amount of memory in use, and
details on individual DIMMs.
– Network Interface Cards (NICs) - Number of installed cards and details on individual NICs.
– PCI Slots - Total available and number in use, and details on individual slots.
– Power Supplies - Number present and details on individual PSUs.
– Processors - Number present and details on individual CPUs.
– Remote Access Card - IP address information, RAC type, and Web interface URL.
5. Under Host Information, click Storage to display a graphic and detailed view of the capacity and type of physical
and virtual storage, including:
– Host system total storage, unconfigured, configured, and global hot spare disk capacity.
– List of how many of each storage component is present in the system.
– Component data table that contains detailed information on that component.
6. Under Host Information, click Firmware to display all Dell Lifecycle Controller firmware information including:
– Update name - BIOS, Dell Lifecycle Controller, power supply, and so on.
– Update type - BIOS, firmware, or application.
– Individual update details - Version, installation time, if an update is in progress or the update status, and the
update version. The update status and version only have data when an update is scheduled, and the update
version is the firmware version to which the system will be updated.
7. Under Host Information, click Power Monitoring to display general power information, energy statistics, and
reserve power information, including:
– Current power budget, profile, warning and failure thresholds.
– Energy consumption, system peak power, and amperage statistics.
– Reserve power and peak reserve capacity.
44