Owner's Manual

18 | P a g e
method immediately, but does not block the UI - it just disables the Restore
Default Alarms button. Saving while the call is still in progress may result in an
error where the Save spinner does not close, locking the user out of the UI.
Bug #DF483507
Issue 13: When you place your cursor over the Server Status for a non-compliant
bare-metal server, the tooltip shows incorrect information.
Bug #DF484729
Issue 14: Update failed when selecting LC and Diags update when doing a BIOS
or firmware update.
Bug #DF436769
Issue 15: When doing a repository base update, downgrades may appear with
criticality as recommended or urgent.
Bug #DF420817
Issue 16: If you view the Plug-in information on vCenter, the vendor (Dell) and
description information is not displayed
Bug #DF478478
Issue 17: The Inventory Schedule Edit screen comes up scrambled during first
pass through.
Bug #DF424620
Issue 18: There is a text alignment issue on the Job Queue – Deployment Jobs
screen.
Bug #DF448456
Issue 19: Reference ISO path should not be truncated.
Bug #CR470639
Issue 20: When doing a firmware update, the Dell Management Plug- does not
resolve domain names on behalf of LC.
Bug #DF465228
Issue 21: Run now on job queue should be enabled after completing the
Configuration Wizard.
Bug #DF484071
Issue 22: Event filter settings are lost when migrating from 1.0 to 1.0.1.
Bug #CR458456
Issue 23: Storage information on the Dell Tab only calls out global hot spares.
Bug # 2065
Issue 24: Some vCenter installations shows the VMware Tools status on the Dell
Management Plug In as Running but Not Installed. The VMware Tools are
installed on the appliance, but do not report status correctly..
Bug #none
Issue 25: For PowerEdge 9th and 10th generation servers, BIOS/BMC/DRAC
firmware versions are viewable only at the Cluster View level in vCenter or on
the Overview page of the individual host view. Firmware version information is
not active in the individual host view under Firmware, and that page appears
grayed out.