Users Guide

– Server Information provides identification, hypervisor, and firmware information, such as:

* Host name, power state, iDRAC IP address, Management IP address, connection profile in use,

model, service tag and asset tag numbers, number of days left on the warranty, and when the last

inventory scan was performed

* Hypervisor, BIOS firmware, and iDRAC firmware versions

– Recent System Log Entries provide the 10 most recent system event log entries. To launch the System

Event Log window that displays additional log details, click Details.

4. Under Host Information, click Hardware Inventory to display a list and further details on all components installed in

host system, including:

– Field-replaceable units (FRUs) - DIMMS, system planar, power supplies, backplanes, controller cards, and

so on.

– Memory - Number of slots available and in use, maximum capacity and amount of memory in use, and

details on individual DIMMs.

– Network Interface Cards (NICs) - Number of installed cards and details on individual NICs.

– PCI Slots - Total available and number in use, and details on individual slots.

– Power Supplies - Number present and details on individual PSUs.

– Processors - Number present and details on individual CPUs.

– Remote Access Card - IP address information, RAC type, and Web interface URL.

5. Under Host Information, click Storage to display a graphic and detailed view of the capacity and type of physical

and virtual storage, including:

– Host system total storage, unconfigured, configured, and global hot spare disk capacity.

– List of how many of each storage component is present in the system.

– Component data table that contains detailed information on that component.

6. Under Host Information, click Firmware to display all Dell Lifecycle Controller firmware information including:

– Update name - BIOS, Dell Lifecycle Controller, power supply, and so on.

– Update type - BIOS, firmware, or application.

– Individual update details - Version, installation time, if an update is in progress or the update status, and the

update version. The update status and version only have data when an update is scheduled, and the update

version is the firmware version to which the system will be updated.

7. Under Host Information, click Power Monitoring to display general power information, energy statistics, and

reserve power information, including:

– Current power budget, profile, warning and failure thresholds.

– Energy consumption, system peak power, and amperage statistics.

– Reserve power and peak reserve capacity.

8. Under Host Information, click Warranty to display system warranty information including:

– Warranty provider name and description of the warranty.

– Start and end dates and how many days are left on the warranty.

– Status of the warranty (active, inactive) and when the warranty information was last updated.

Inventory And Licensing

If server data cannot be retrieved and displayed, there are several possible causes:

• The server was not associated with a connection profile, and therefore an inventory task cannot be completed.