Users Guide

– For iDRACs already configured and enabled for Active Directory on which you want to use Active Directory,
select the Use Active Directory check box; otherwise skip down to configure the iDRAC credentials.
* In the Active Directory User Name text box, type the user name. Type the username in one of these
formats: domain\username or domain/username or username@domain. The user name is limited to
256 characters. Refer to Microsoft Active Directory documentation for user name restrictions.
* In the Active Directory Password text box, type the password. The password is limited to 127
characters.
* In the Verify Password text box, type the password again.
* In the Certificate Check drop-down list, select one of the following:
• To download and store the iDRAC certificate and validate it during all future connections,
select Enable .
• To perform no check and not store the certificate, select Disabled.
– To configure iDRAC credentials without Active Directory, do the following:
* In the User Name text box, type the user name. The user name is limited to 16 characters. Refer to
the iDRAC documentation for information about user name restrictions for your version of iDRAC.
NOTE: The local iDRAC account requires administrative privileges for updating firmware,
applying hardware profiles, and deploying hypervisor.
* In the Password text box type the password. The password is limited to 20 characters.
* In the Verify Password text box, type the password again.
* In the Certificate Check drop-down list, select one of the following:
• To download and store the iDRAC certificate and validate it during all future connections,
select Enable.
• To perform no check and not store the iDRAC certificate, select Disabled.
6. Click Next.
7. In the Host Credentials page, under Credentials, do one of the following:
– For hosts already configured and enabled for Active Directory on which you want to use Active Directory,
select the Use Active Directory check box; otherwise skip down to configure your Host Credentials.
* In the Active Directory User Name text box, type the user name. Type the username in one of these
formats: domain\username or domain/username or username@domain. The user name is limited to
256 characters. Refer to Microsoft Active Directory documentation for user name restrictions.
* In the Active Directory Password text box, type the password. The password is limited to 127
characters.
* In the Verify Password text box, type the password again.
* In the Certificate Check drop-down list, select one of the following:
• To download and store the Host certificate and validate it during all future connections,
select Enable .
• To perform no check and not store the Host certificate, select Disabled.
– To configure Host Credentials without Active Directory, do the following:
* In the User Name text box, type the user name. The user name must be root.
19