Update Manual

7
Firmware Update for datacenters and clusters using the Dell Management Plug-in for VMware vCenter
Welcome page
5. Click Next.
6. In the Firmware Inventory page, review the components that are currently installed on the
servers. The list presented is using data from the last scheduled hardware inventory, not from
a real-time data. This information is from the time the last inventory was run on the system.
You should look at this time to determine the hardware inventory data is fresh, and that
firmware wouldn't have changed since the last scheduled inventory. If the firmware was
updated after the inventory was run, inventory does not reflect it until the next inventory is
run.