Quick Installation Guide
Table Of Contents
- Dell Management Plug-In for VMware vCenter Quick Install Guide Version 1.7
- Quick Start Installation
- Understanding How To Configure the Dell Management Plug-in Using the Wizard
- Configuration Wizard Welcome Page
- Creating A New Connection Profile [Wizard]
- Configuring Events And Alarms [Wizard]
- Setting Up A Proxy Server [Wizard]
- Scheduling Inventory Jobs [Wizard]
- Running A Warranty Retrieval Job [Wizard]
- Configuring the Deployment Credentials [Wizard]
- Setting The Default Firmware Update Repository [Wizard]
- Enabling The OMSA Link [Wizard]
- Configuring Dell iDRAC Auto-Discovery And Initial Start-up
- Configuring OMSA Agents To Send Traps
- Configuring NFS Shares
- For More Configuration Information
4. Enable firmware updates.
a. Download firmware updates, and make them available to applicable systems.
5. Configure the Dell iDRAC user name and password.
Deploying the Dell Management Plug-in OVF Using the vSphere Client
This procedure assumes that you have downloaded and extracted the product zip file (Dell_Management_Plug-
in_<version>.<buildnumber>.ZIP) from the Dell website.
NOTE: Thick Provision Eager Zeroed is the disk format recommended during this installation.
To deploy the Dell Management Plug-in OVF using the vSphere Client:
1. Locate the Dell Management Plug-in virtual disk that you downloaded and extracted and run
Dell_Management_Plug-in_<version number>.<build number>.exe.
2. Agree to the EULA, extract the user guides and obtain the OVF file.
3. Copy/move the OVF file to a location accessible to the VMware vSphere host to which you will upload the
appliance.
4. Start the VMware vSphere client.
5. From the VMware vSphere client, select File → Deploy OVF Template.
Figure 1. Deploying the OVF Template from vSphere
6. In the Source window, use the Browse button to locate the OVF package. The location can be a local drive,
network drive, CD/DVD, or from the internet. The Dell Management Plug-in file size is approximately 1.8GB.
NOTE: The install can take between 10 to 30 minutes if the OVF package resides on a network share. For the
quickest installation, it is recommended that you host the OVF on a local drive.
7. Click Next.
8. In the OVF Template Details window, review the information presented.
9. Click Next.
10. In the Name and Location window, do the following:
a. In the Name text box, enter the name of the template. This name can contain up to 80 characters.
b. In the Inventory Location list, select a location to store the template.
11. Click Next.
7