Reference Guide

Figure 5. The Dell Managment Plug-in Successfully Added to vCenter

Installation Verification

The following steps verify that the Dell Management Plug-in installation was successful:

1. Confirm that the Dell Management Plug-in icon appears inside of vSphere Client. If it does not, restart the vSphere

Client and check again.

2. Check that vCenter can communicate with the Dell Management Plug-in by attempting a ping command from the

vCenter server to the virtual appliance IP address or hostname.

3. In vSphere Client, click Plug-ins → Managed Plug-ins. In the Plug-in Manager window verify the Dell Management

Plug-in is installed and enabled.