User's Manual

18 Introduction
3 Ty p e Tas k n am e , Description , and select BMC for Dell Server as the
Tas k Tar get
and click Next. The Command Line screen appears .
4
Type the path of the application ipmish.exe (the path where BMU was
installed on the Operator Console) in the
Application field. For example,
C:\Program Files\Dell\SysMgt\bmc\ipmish.exe
5
In the Parameters field, enter the command line parameters in the
following format:
• Type
-ip and choose the BMC IP Address from the drop-down menu.
•Type
-u <BMC user name> -p <BMC password> -k <BMC
KG key> <IPMI Task String>
• Replace <IPMI Task String> with one of the following options:
–
power status (for Check Power Status task)
–
power on (for Power On task)
–
power off (for Power Off Gracefully task)
–
power off -force (for Forced Power Off task)
–
power cycle (for Power Cycle task)
–
power reset (for Power Reset task)
–
identify on (for LED Identification On task)
–
identify off (for LED Identification Off task)
A sample command line parameter entry:
-ip $Target/Property[Type=
"Dell.Connections00130025!Dell.Connections.
ServerBMC"]/BMCIPAddress$ -u root -p calvin
-k 0000 power status
6
Click Create to create the task and repeat this procedure for each new
BMC task you want to create.
book.book Page 18 Wednesday, August 6, 2008 9:44 AM