User's Manual

24 Using the Dell™ Management Pack
Severity Indicators in Diagram Views
Dell Tasks
Tasks are available in the Actions pane of the Operations Console. When you
select a device or a component in any of the Dell diagram views, the relevant
tasks appear in the Actions pane.
NOTE: You can run the tasks, Launch Server Administrator and Clear ESM Logs,
from the Diagram view, State view, or Alert view
A summary of the Dell Tasks that you can perform using the Dell
Management Pack are explained in Table 3-3:
Table 3-2. Severity Level Indicators
Icon Severity Level
Normal/OK. The component is working as expected.
Warning/Noncritical. A probe or other monitoring device has detected
a reading for the component that is above or below the acceptable level.
The component may still be functioning, but it could fail. The
component may also be functioning in an impaired state.
Critical/Failure/Error.The component has either failed or failure is
imminent. The component requires immediate attention and may
need to be replaced. Data loss may have occurred.
White The component is not applicable for the specific server.
Grey The service is unavailable.