User's Manual

18 Using the Dell™ Management Pack
The health of a component is derived by reviewing the unresolved alerts
associated with the component. Table 3-1 explains the various state
components that the Dell Management Pack uses and their corresponding
severity levels.
Dell Diagram Views
The Diagram View offers a hierarchical, graphical representation of all
Dell devices on your network that Operations Manager 2007 manages. The
Dell Management Pack offers the following views:
• All Groups Diagram
• Dell Modular Servers Diagram
• Dell Monolithic Servers Diagram
• Dell Printers Diagram
The diagram views allow you to monitor the following devices and components:
• Dell Modular and Monolithic Systems
– Baseboard Management Controller (BMC)
– Dell Remote Access Controller (DRAC)
– Chassis (Modular systems only)
Table 3-1. State Components and Severity Levels
State
Component
Severity Level
Normal/OK. The component is working as expected.
Warning/Noncritical. A probe or other monitoring device has detected
a reading for the component that is above or below the acceptable level.
The component may still be functioning, but it could fail. The
component may also be functioning in an impaired state.
Critical/Failure/Error. The component has either failed or failure is
imminent. The component requires immediate attention and may need
to be replaced. Data loss may have occurred.
White The component is not applicable for the specific server.
Grey The service is unavailable.