User's Manual

Importing the Dell™ Management Pack 13
If your systems have different BMC credentials, install BMU 2.0 on the
Operator Console system and create new console tasks in Authoring pane
targeted on BMC for Dell Server:
1
In the Authoring pane, right-click Ta sk s and select Create new task .
The
Create Task Wizard appears.
2 In the Tas k Typ e screen, select Command line Under Console Tasks .
Click
Next . The General Properties screen appears.
3 Ty p e Task name , Description , and select BMC for Dell Server as the
Tas k Tar get
and click Next. The Command Line screen appears .
4
Type the path of the application ipmish.exe in the Application field. For
example,
C:\Program Files\Dell\SysMgt\bmc\ipmish.exe
5
In the Parameters field, enter the command line parameters in the
following format:
•Type
-ip and choose the BMC IP Address from the drop-down menu.
•Type
-u <BMC user name> -p <BMC password> -k <BMC
KG key> <IPMI Task String>
• Replace <IPMI Task String> with one of the following options:
–
power status (for Check Power Status task)
–
power on (for Power On task)
–
power off (for Power Off Gracefully task)
–
power off -force (for Forced Power Off task)
–
power cycle (for Power Cycle task)
–
power reset (for Power Reset task)
–
identify on (for LED Identification On task)
–
identify off (for LED Identification Off task)
A sample command line parameter entry:
-ip $Target/Property[Type=
"Dell.Connections00130025!Dell.Connections.Ser
verBMC"]/BMCIPAddress$ -u root -p calvin -k
0000 power status
6
Click Create to create the task and repeat this procedure for each new
BMC task you want to create.