Owner's Manual

74 Managing Jobs and Tasks
4 From the Command Line Type , select Dell OpenManage Remote Access
Controller
and then setniccfg .
Click
Add .
Select
-s and enter the value 192.168.0.120 255.255.255.0
192.168.0.1
and then click Add .
Or, in
Command Syntax , type setniccfg -s 192.168.0.120
255.255.255.0 192.168.0.1
.
NOTE: You can select a maximum of four parameters from the drop-down list,
after which the parameter drop-down is not dynamically populated.
5 Click Advanced and enter the user credentials and specify the path for
the log file and then click
OK .
NOTE: If you do not specify any credentials, the task uses the factory default
credentials to communicate with the managed device.
The command Line Builder task is displayed under the Dell Tasks folder.
6 To run the task on a group of systems, click New Schedule.
7 In the Create New Schedule page, select Now .
8 On the New Schedule page, click Add to add the devices on which you
want to run this task.
Creating an Associate Dell Devices Task
If you discover devices using Import Microsoft Active Directory or Import
Domain Membership/WINS task or by pushing the Altiris Agent on the
target devices, the Dell devices are not classified.
For more information on discovering devices with Active Directory import or
domain resource, see the Dell Management Console Online Help.
To associate a connection profile with each of the discovered devices and
classify these devices as Dell devices.
book.book Page 74 Monday, April 19, 2010 5:19 PM