Owner's Manual
44 Configuring Discovery and Inventory Settings
Managing Credentials
To add Dell|EMC storage devices to the network and discover these devices,
provide the credentials for the discovery solution to communicate with the
Dell|EMC devices.
1
In Dell Management Console, click
Settings
All Settings
.
2
On the left hand pane, under the
Settings
Monitoring and Alerting
Credential Settings
folder, select
Credentials Management
.
3
On the right hand pane, click
Add Credentials
.
4
On the
Add Credentials
dialog box, select
EMC Credentials
as the
Credential Type
.
5
Provide the
Name
of this credential, for example,
emc-cred.
Enter the
Username
and
Password
for the Dell|EMC device and click
OK
.
The new credential is displayed on the
Credential Management
page.
Connection Profiles
Dell Management Console provides a default connection profile. This profile
has the following protocols enabled:
•HTTP
•ICMP
• SNMP V1 V2
•SNMP Trap Sender
•WMI
Refer to the default connection profile as a template and create a new
connection profile with the protocols that you want to use to discover
networked devices.
Viewing the Default Connection Profile
To view the default connection profile:
1
Click
Setting
All Settings
.
2
On the left pane, select the
Settings
folder
Monitoring and Alerting
Protocol Management
Connection Profiles
Manage Connection
Profiles
.
book.book Page 44 Monday, April 19, 2010 5:19 PM