Owner's Manual

116 Monitoring and Alerting
Cloning a Rule
1 In the Monitoring and Alerting portal page, on the left pane, select
Monitor  Policies  Rule Library .
2 Right-click on the rule you want to change and select the Clone icon.
The rule is cloned.
3 Select the cloned rule.
4 Modify the property you want to change and click Save .
5 Repeat steps 1-4 for all rules you want to change.
Cloning the Original Policy
1 In the Monitoring and Alerting portal page, on the left pane, select
the policy you want to clone.
2 Right-click the policy and select Clone .
The policy is cloned.
3 Select the cloned policy.
4 Select all existing rules in the policy and delete them using the - button.
5 Use the + button to add all your new rules to the policy.
6 Enter a new policy name and click the Apply to drop down to select a new
target for your policy.
NOTE: Ensure that you select a target that does not overlap the original
policy, or this may lead to wasted bandwidth in monitoring the metric on the
same device twice.
7 Click the On/Off dropdown and select On .
8 Click Save changes .
Perform a forced client policy update (or wait the default policy update period)
for the changes to take affect. See “Forcing a Client Policy Update“for more
information.
book.book Page 116 Monday, April 19, 2010 5:19 PM