Owner's Manual

102 Monitoring and Alerting
3 Click Save changes .
4 Perform a forced client policy update (or wait the default policy update
period) for the changes to take affect. See “Forcing a Client Policy
Update.”
Changing a Poll Setting
1 In the Monitoring and Alerting portal page, on the left hand pane,
select
Monitor  Policies  Metric Library .
2 Select the metric for which you want to change the interval and click
the pencil icon to edit it.
3 Enter the time in seconds for the Polling Interval and click OK .
4 Perform a forced client policy update (or wait the default policy update
period) for the changes to take affect. See “Forcing a Client Policy
Update“for more information.
Adding a Task to a Rule
1 In the Monitoring and Alerting portal page, on the left hand pane,
select
Monitor  Policies  Rule Library .
2 Select the rule for which you want to add the task. For example,
Device Primary Health Critical and click the pencil icon to edit.
3 In the Actions section of the edit rule dialog box, under Ta sk s ,
click the yellow star to add a new task.
4 Select the task you want to add. For example, Send E-mail .
5 In the right pane, enter the appropriate details you want to save with the
task and click
OK .
6 Verify the task is displayed under the Ta sk s list as part of this rule.
7 In the Edit Rule dialog, click OK .
8 Perform a forced client policy update (or wait the default policy update
period) for the changes to take affect. See “Forcing a Client Policy
Update“for more information.
Modifying Metrics
You can modify metrics.
book.book Page 102 Monday, April 19, 2010 5:19 PM