Owner's Manual

in the Monitor Resources by Status Web part.
[773]
======================================================================
Network Discovery
======================================================================
* SNMP Discovery of Windows Server 2008 Devices
An SNMP-only network discovery task will fail to discover a system if
that system is running Windows Server 2008 with its Network
discovery feature disabled.
Perform the following steps to enable Network discovery on the
target server:
a) Navigate to the target system's Control Panel.
b) Select Network and Sharing Center.
c) In the Sharing and Discovery section, set Network discovery to
On.
[250493] [253417]
* IPMI Discovery
For proper classification of the IPMI device, the Channel Privilege
Level Limit on the IPMI device and the IPMI Privilege level of the
connection profile must match. If these levels do not match, the
device will be classified as a Network Resource.
The following table lists the appropriate level relationships:
+-------------------------------+----------------------+
| IPMI Device | Connection Profile |
| Channel Privilege Level Limit | IPMI Privilege level |
+-------------------------------+----------------------+
| Administrator | admin |
+-------------------------------+----------------------+
| Operator | operator |
+-------------------------------+----------------------+
| User | user |
+-------------------------------+----------------------+
[270173]
* Discovery of Microsoft High Availability (HA) Clusters
HA Clusters can be discovered using SNMP only. The discovery task
that is intended to discover HA Clusters must have SNMP enabled in
its Connection Profile and the associated credentials must be correct
for the target devices.
In order for the members to be discovered, the IP address of each
cluster member must be included in the list of addresses to be
discovered by the discovery task.
When discovering HA Clusters, the cluster name may replace the name
of the active cluster node. To avoid this, do not include the cluster
IP address in the discovery range.
If the cluster IP address is the only IP address in the discovery
task that is related to the HA Cluster, the currently active cluster
node will be discovered and its name will be the same as that of the
cluster itself. This results in the cluster name appearing in