Technical Specifications

Table 1. Chassis dimension for the PowerEdge T150 system
Drives Xa Xb Ya Yb Yc Za Zb Zc
4 x 3.5-
inch
175 mm (6.88
inches)
NA 360 mm
(14.17
inches)
362.9 mm
(14.28 inches)
NA With bezel :
35 mm (17
inches)
Without
bezel : NA
400 mm
(15.74
inches)
418.75 mm
(16.48
inches)
NOTE: Zb is the nominal rear wall external surface where the system board I/O connectors reside.
System weight
Table 2. PowerEdge T150 system weight
System configuration Maximum weight (with all drives/SSDs)
4 x 3.5-inch system 11.68 kg (25.74 lbs.)
Processor specifications
Table 3. PowerEdge T150 processor specifications
Supported processor Number of processors supported
Intel Xeon E-2300 series processor with up to 8 cores or Intel
Pentium processor with up to 2 cores per processor
One
NOTE: Note: For Pentium processor, maximum memory speed supported is 2666 MT/s.
PSU specifications
The PowerEdge T150 system supports one AC cabled power supply unit (PSU).
Table 4. PowerEdge T150 PSU specifications
PSU Class Heat
dissipation
(maximum)
Frequency Voltage AC DC Current
High line
200–240
V
Low line
100–120 V
300 W AC Bronze 1024 BTU/
hr
50/60 Hz 100–240 V
AC,
autoranging
300 W 300 W NA 4.6 A
400 W AC Platinum 1365 BTU/
hr
50/60 Hz 100–240 V
AC,
autoranging
400 W 400 W NA 5.4 A
NOTE: Heat dissipation is calculated using the PSU wattage rating.
NOTE: When selecting or upgrading the system configuration, to ensure optimum power utilization, verify the system
power consumption with the Dell Energy Smart Solution Advisor available at Dell.com/ESSA.
Technical specifications 5