Users Guide

Table 6. iDRAC profile settings
S.No Target Server Profile Settings What is Applicable
1. Rack and Tower
systems
All four types of
attributes are
configured.
All attributes in the
iDRAC profile.
2. Blade systems All four types of
attributes are
configured.
• All attributes in
Common IP settings.
• All attributes in IPv4
settings.
• Only vLAN ID and
vLAN priority
attributes from
Advanced LAN
settings.
3. Rack, Tower, or Blade
system with Static IP
address
IPv4 Configuration
attributes only.
IPv4 address source is
updated.
4. Rack, Tower, or Blade
systems
LAN Settings attributes
only.
Applied only to Rack
and Tower systems and
not to Blade systems.
5. Rack, Tower, or Blade
systems
Advanced LAN Settings
attributes only.
All Advanced LAN
Settings attributes are
applied to Rack and
Tower systems.
Only vLAN ID and vLAN
priority attributes are
applied to Blade
systems.
6. Rack, Tower, or Blade
systems
Common IP
Configuration attributes
only.
Common IP
Configuration attributes.
7. Rack, Tower, or Blade
systems without iDRAC6
enterprise card
LAN Settings with NIC
mode set to Dedicated.
Nothing is applied as
this attribute needs the
iDRAC6 enterprise card.
8. Rack, Tower, or Blade
systems
LAN Settings with NIC
mode set to Shared.
Attribute is applied only
to Rack and Tower
systems and only if the
host operating system is
configured for NIC
teaming.
9. Rack, Tower, or Blade
systems
IPv4 Configuration
where IP range specified
is less than the number
of systems.
Nothing is applied and
an error is displayed in
the OS deployment
workflow.
51