Setup Guide

It is recommended that the network adapter is connected to the network port in the server on which the operating system is being
deployed. For information on component-specific software prerequisites and requirements, see Component-specific prerequisites.
Component-specific prerequisites
The DLCI for Configuration Manager installer verifies the following prerequisites before installation:
During initial startup
• Regsrv32.exe
• WinRM
• Client for NFS
• For Configuration Manager 2012 SP2
• Windows 2012 R2
• Windows 2008 R2
• Windows 8.1 Enterprise
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 Standard Edition
• Windows Server 2012 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012 R2 SP1
• Windows 2012 R2
• Windows 2008 R2
• Windows 8.1 Enterprise
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 R2 Standard Edition
• Windows Server 2012 R2 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012 R2
• Windows 2012 R2
• Windows 2008 R2
• Windows 8.1 Enterprise
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 R2 Standard Edition
• Windows Server 2012 R2 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012 SP1
• Windows 2008 R2
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 Standard Edition
• Windows Server 2012 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012
• Windows 7
• Microsoft Windows Server 2008 and 2008 R2
• Microsoft .NET version 4.0
For DLCU
• Installation on primary site server or Configuration Manager Admin console
8
Prerequisites