Release Notes

• If the host system has Lifecycle Controller version 1.5, ensure that while configuring username as part of
iDRAC configuration, the username length is less than 16 characters. Affected version: DLCI 3.2 with 11
generation Lifecycle Controller 1.5.
• If the host system is Dell’s 11th generation of PowerEdge server and has Lifecycle Controller version 1.5, the
RAID configuration of H200 controller using DLCI 3.2 does not work correctly. Upgrade to Lifecycle
Controller firmware version 1.5.1. Affected version: DLCI 3.2 with 11G Lifecycle Controller 1.5
• While applying minimum bandwidth on Qlogic Partitionable NIC cards, if the summation of minimum
bandwidth on all partitions of a port reaches more than 100 the apply operation will fail. Ensure that you
apply ‘0’ on all partitions as minimum bandwidth before applying any other values.
• BIOS Configuration fails when it is done for the second time if the Dell’s 11th generation of PowerEdge
server has the 1.9 (monolithic) or 3.4 (modular) version of iDRAC firmware. Ensure that you upgrade the
iDRAC firmware level to 1.92 (monolithic) or 3.42 (modular).
• It is recommended that you delete and re-import the server from Configuration Manager before installing a
Non-Windows OS on the server which already has Windows OS installed and Configuration Manager Client
configured.
• If you deploy the Windows Server operating systems on Dell’s 11th generation of PowerEdge servers where
drivers were already applied from Lifecycle Controller, then few device drivers may not work or may be
unavailable. As a workaround, manually update drivers or in Task Sequence in the server where you
deployed the operating system, as a fallback for the option Apply Drivers from LC use option Apply Driver
Package.
• Before installing the DLCI version 3.2 fix, if the servers are discovered or imported, then re-discovered or re-
imported the server after installating the fix. The Node ID Property is displayed on the Dell out-of-band
controllers properties page.
• DLCI Auto discovery does not work with iDRACs (version 2.10.10.10) Transport Layer Security (TLS) 1.2
protocol. As a workaround, ensure that you have TLS 1.1 available in the system where you have installed
DLCI.
• DLCI Auto discovery does not work with iDRACs (version 2.10.10.10) TLS 1.2 custom certificate.
Software Requirements
System Center 2012 R2 Configuration Manager or System Center 2012 SP1 Configuration Manager or
System Center 2012 Configuration Manager.
Installation Instructions
Extract Files:
1. Click Browse and navigate to the self-extractable zip file that you downloaded.
2.
Double-click on the zip file to extract the downloaded package.
3. Click Continue.
4.
Specify the location to extract the files.
5.
Click OK to extract files. After the files are extracted the following message is displayed:
All files were successfully unzipped.
6.
Click OK to exit from the installer.
Installation
Browse to the folder where the files are extracted and refer the installation guide.
Installation and Configuration Notes