Users Guide

S.No Target Server Profile Settings What is Applicable
4. Rack, Tower, or Blade
systems
LAN Settings attributes
only.
Applied only to Rack
and Tower systems and
not to Blade systems.
5. Rack, Tower, or Blade
systems
Advanced LAN Settings
attributes only.
All Advanced LAN
Settings attributes are
applied to Rack and
Tower systems.
Only vLAN ID and vLAN
priority attributes are
applied to Blade
systems.
6. Rack, Tower, or Blade
systems
Common IP
Configuration attributes
only.
Common IP
Configuration attributes.
7. Rack, Tower, or Blade
systems without iDRAC6
enterprise card
LAN Settings with NIC
mode set to Dedicated.
Nothing is applied as
this attribute needs the
iDRAC6 enterprise card.
8. Rack, Tower, or Blade
systems
LAN Settings with NIC
mode set to Shared.
Attribute is applied only
to Rack and Tower
systems and only if the
host operating system is
configured for NIC
teaming.
9. Rack, Tower, or Blade
systems
IPv4 Configuration
where IP range specified
is less than the number
of systems.
Nothing is applied and
an error is displayed in
the OS deployment
workflow.
10. Rack, Tower, or Blade
systems booted to
Unified Server
Configurator
All four types of
attributes are
configured.
All attributes applicable
to the systems.
3. Click Next to select an advertisement.
NOTE: If there is an error while applying an iDRAC profile, the operating system deployment
process stops.
Comparing and updating firmware inventory for systems
in a collection
This feature enables you to retrieve, compare, and update firmware inventory on the Dell systems with
Lifecycle Controllers in a collection.
NOTE: To compare and update firmware remotely, you must ensure that the Dell systems have
iDRAC6 firmware version 1.5 or higher. For more information on upgrading to firmware version 1.5,
see the Integrated Dell Remote Access Controller 6 (iDRAC6) Version 1.5 User Guide available at
dell.com/support/home.
46