Setup Guide

• Confirm that virtual disk is available on the target system.
• Servers, where ESXi are deployed, are moved to another collection Managed Dell Lifecycle Controller (ESXi).
• If DHCP lookup fails while deployment, then the server times out and it is not moved into Managed Dell Lifecycle Controller
(ESXi).
It is recommended that the network adapter is connected to the network port in the server on which the operating system is being
deployed. For information on component-specific software prerequisites and requirements, see Component-Specific prerequisites.
Component-specific prerequisites
The DLCI for Configuration Manager installer verifies the following prerequisites before installation:
During initial startup
• Regsrv32.exe
• WinRM
• Client for NFS
• For Configuration Manager 2012 SP2
• Windows 2012 R2
• Windows 2008 R2
• Windows 8.1 Enterprise
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 Standard Edition
• Windows Server 2012 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012 R2 SP1
• Windows 2012 R2
• Windows 2008 R2
• Windows 8.1 Enterprise
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 R2 Standard Edition
• Windows Server 2012 R2 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012 R2
• Windows 2012 R2
• Windows 2008 R2
• Windows 8.1 Enterprise
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 R2 Standard Edition
• Windows Server 2012 R2 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012 SP1
• Windows 2008 R2
• Windows 8 Pro and Windows 8 Enterprise
• Windows Server 2012 Standard Edition
• Windows Server 2012 Datacenter Edition
• Microsoft Windows Server 2008 (x64)
• Microsoft .NET version 4.0
• For Configuration Manager 2012
• Windows 7
• Microsoft Windows Server 2008 and 2008 R2
• Microsoft .NET version 4.0
8
Prerequisites