Manualshelf

Users Guide

ManualsBrandsDell ManualsActive System ManagerLifecycle Controller Integration Version 3.0 for Microsoft System Center Configuration Manager
51525354555657585960
• To add a value, enter the value of the enumeration attribute in the Possible Value field, and click
Add.
• To update the value of the attribute, select the value that you want to update, make the necessary
changes in the Possible Values field, and click Update.
• To delete a value, select the value and click Delete. A dialog box appears asking for confirmation.
Click Yes to delete the value.
6. Click OK to close the Custom Attribute Editor and go back to the BIOS Attributes tab.
Editing an existing BIOS attribute
To edit an existing BIOS attribute, follow the step 2 to step 5 of Editing an Existing Profile.
Changing the BIOS boot sequence and hard disk drive sequence
To change the BIOS boot sequence and hard disk drive sequence:
1. In the BIOS Configuration screen, select Create a New Profile or Edit an Existing Profile, and click
Browse to browse for the profile.
2. Click the Boot Sequence tab.
The current BIOS boot sequence and hard disk drive sequence is displayed.
3. Use the Move Up and Move Down buttons to change the BIOS boot sequence or the hard disk drive
sequence.
4. Click OK to save the changes.
NOTE: Click Reset to reset any changes made.
Viewing and configuring RAID
This feature enables you to view and configure RAID on the server. To configure RAID:
1. On the System Viewer utility, click RAID Configuration.
The RAID Configuration screen displays the RAID information of your system, such as number of
virtual disks, their controller IDs, RAID levels, and physical disks.
2. Click Create RAID profile to create a new RAID configuration profile using Array Builder. For more
information on using the Array Builder, see Using the Array Builder.
Configuring iDRAC profiles for a system
This features enables you to define the iDRAC configuration and save it and apply the profile to a
collection as part of the workflow while deploying an operating system.
You can create or edit iDRAC profiles for a system using the System Viewer utility.
Creating an integrated Dell Remote Access Controller profile
To create an iDRAC profile:
1. On the System Viewer utility, click iDRAC Configuration.
The Integrated Dell Remote Access Controller Configuration options are displayed.
2. Select Create a New Profile and click Next.
3. Click the Network Configuration tab.
54