Setup Guide

• Servers, where ESXi are deployed, are moved to another collection Managed Dell Lifecycle
Controller (ESXi).
• If DHCP lookup fails while deployment, then the server times out and it is not moved into
Managed Dell Lifecycle Controller (ESXi).
It is recommended that the network adapter is connected to the network port in the server on which the
operating system is being deployed. For information on component-specific software prerequisites and
requirements, see Component-Specific Prerequisites.
Component-specific prerequisites
The DLCI for Configuration Manager installer verifies the following prerequisites before installation:
During initial startup
• Regsrv32.exe
• WinRM
• Client for NFS
• For Configuration Manager 2012 R2
– Windows 2012 R2
– Windows 2008 R2
– Windows 8.1 Enterprise
– Windows 8 Pro and Windows 8 Enterprise
– Windows Server 2012 Standard Edition
– Windows Server 2012 Datacenter Edition
– Microsoft Windows Server 2008 (x64)
– Microsoft .NET version 4.0
• For Configuration Manager 2012 SP1
– Windows 2008 R2
– Windows 8 Pro and Windows 8 Enterprise
– Windows Server 2012 Standard Edition
– Windows Server 2012 Datacenter Edition
– Microsoft Windows Server 2008 (x64)
– Microsoft .NET version 4.0
• For Configuration Manager 2012
– Windows 7
– Microsoft Windows Server 2008 and 2008 R2
– Microsoft .NET version 4.0
For DLCU
• Installation on primary Site Server or Configuration Manager Admin console
• DSDP 3.0 on DLCI version 3.0 for Microsoft System Center 2012 R2 Configuration Manager, Microsoft
System Center 2012 SP1 Configuration Manager, and Microsoft System Center 2012 Configuration
Manager consoles
• Windows Automation Install Kit (WAIK)/ Windows Assessment and Deployment Kit (ADK)
10